S-type Load Cells

S-type Load Cells

Model 619 Features:

  • Capacities 1500 to 6000kg
  • Alloy steel construction
  • Sealing: welded to IP67
  • Six wire cable (sense circuit)
  • S-Type design for use in tension & compression
  • Choice of mounting threads Metric or Unified systems

Optional Feature:

  • EEx ia IIC T6-ATEX hazardous area approval.

Description:

Model 619 is a low cost tension-compression load cell made from nickel plated alloy steel and has bonded covers for additional protection. It is suitable for use in a wide range of weighing, process weighing, force measurement and industrial process control applications.

Protected to meet IP67 requirements, the construction of the 619 load cell allows its use in most industrial process applications. For IP68 requirements, select the fully-welded stainless steel model 620, which shares the same dimensions as model 619. The additional sense wires compensate for changes in lead resistance due to temperature change and/or cable extension. Complete compensation of changes in lead resistance is achieved by feeding this voltage into appropriate electronics.


Applications:

  • Hopper (tank weighing)
  • Hybrid scales
  • Belt weighing
  • Lever arm conversions
  • Material testing machines
  • Vibrations filling equipment
  • Dynamometers
  •  

Outline Dimensions in mm

Model 615 and 616 Features:

  • Capacities 50 - 1000kg
  • Nickel plated alloy steel (615) or stainless steel (616) construction
  • IP67 protection
  • IP67 protection
  • For use in tension or compression
  • 6 wire (sense) circuit
  • Model 615 output standardized to ±0.1%
  •  

Optional Feature:

  • EEx ia IIC T4 hazardous area approval.

Description:

Models 615 and 616 are tension-compression load cells which share the same dimensions. Humidity resistant coating and shielded cables enable these load cells to be used in harsh environments while maintaining their operating specifications.

The additional sense wires compensate for changes in lead resistance due to temperature change and/or cable extension. Ideally suited for lever conversions, hanging scales, force measurement and a wide range of other industrial applications. Model 616 is made from stainless steel and has bonded covers for additional protection (except 50kg). An alternative lower cost version is made from alloy steel (model 615), with riveted covers.


Applications:

  • Hopper (tank weighing)
  • Hybrid scales
  • Belt weighing
  • Lever arm conversions
  • Material testing machines
  • Vibrations filling equipment
  • Dynamometers
  •  

Outline Dimensions in mm

Midas Autosoft is the perfect Engineering Solutions Provider for your next project!